ICZ Series Standard Chemical Centrifugal Pump
Design Features
1) The structure conforms to the ISO5199 standard, and the external dimensions conform to the ISO2858 standard
2) Structural design of the rear door: it can be disassembled without dismantling the pipeline and motor
3) Suitable for harsh continuous operating conditions
4) Bearing type: Three rolling contact bearings can be lubricated by oil or grease according to requirements
5) Open, semi-open or closed impeller
6) The shaft sleeve and O-ring fully protect the shaft from contacting the pumped medium
7) Standard single-end mechanical seal, double-end mechanical seal, tandem mechanical seal or cartridge mechanical seal can be installed
8) The mechanical seal is installed in the open sealed cavity
9) The pressure of the seal cavity is adjusted by the back blade of the impeller
10) Low NPSHr
11) Realize the maximum interchangeability of this series of pump-type parts
12) Most standard pump types can realize factory stock delivery
13) 316 stainless steel bracket can be produced according to demand
14) Heating jacket or cooling jacket can be provided according to demand
15) Optional: INPRO SEAL VBX bearing box labyrinth seal
Performance
Capacity: up to 780 m3 / h (3434 US gpm)
Total head: up to 160 m (525 ft)
Maximum operating pressure: 16 bar (232 PSI)
Temperature operating range: up to 350 ° C (center support)
Maximum speed: up to 3600rpm at 60Hz
Larger capacity and higher head designs are available upon request.
Materials
Cast steel, stainless steel, duplex stainless steel: A743CD4MCu
Advanced austenitic duplex stainless steel: A743CN7M
Other materials can be provided upon request: titanium, Hastelloy, nickel ...
Application
Suitable for all industries
Chemical, petrochemical, steel, paper, food